HANGZHOU PERPETUAL MACHINERY & EQUIPMENT CO,. LTD

Specializing in manufacturing gears and sprockets!

conveyor sprocket

SPROCKET STANDARD: DIN、MARTIN、JIS
WELCOME:OEM/ODM
LEAD TIME:20 days samples.45 days official order

Send Inquiry
Product Details

Convery Sprocket


1.Material: 

C45, Q235A(SS41), ZG35 ,HT200 etc.

 

2.Surface Treatment:

Quenching treatment , Drawing temper ,Blackening ,Zinc-plated , Surface sandblasting, electroplating processing Carburizing treatment  etc.

 

3.Application: 

The product is mainly applied in wheat, corn harvest machine, maize peeling machine, planter, pastoral, etc. All kinds of agricultural machinery, mining equipment, food machinery, printing and dyeing, textile, hoist, three-dimensional garage conveying equipment such as all kinds of industrial machinery.

 

4.Processing equipment: 

Slotting machine , Hobbing machine, CNC lathes and other equipment.

 

5.Sprocket models: 

Contains non-standard sprocket (custom) according to customer's drawings, standard sprocket (American standard and metric).

 

6.Package: 

Wooden Case/Container and pallet, or made-to-order


7.Introduction 

The sprockets installed on the shaft shall not be oscillating and twisting. In the same drive assembly, the ends of the two sprockets shall be on the same flat surface, the center distance of the sprocket shall be less than 0.5 meters, and the distance between the and 0.5 meters of the sprocket Center shall be offset by 1 mm. But there is no friction sprocket gear phenomenon, if two rounds are too large, prone to offline accelerated wear. When you check the sprocket, you must carefully check and adjust the offset.


组合-1_页面_176-副本.jpg


未标题-2.jpg

Related Products
Inquiry