Gear maintenance and maintenance methods
1, the operation process, the timely removal of the inner wall and often machine mechanical parts stained on the set of dirt, can reduce the mechanical load and reduce the hammer claw or flail wear.
2, the gear box should be in time to add standard gear oil, the general oil surface height in the gear in the oil surface 1/3 more suitable. It is necessary to clean the gearbox and replace gear oil every year when the machine is finished, and replace the gear oil. The butter should be filled with butter once every shift (12 hours).
3, check the hammer claw or flail wear, must be replaced, should change the group to maintain the dynamic balance of the cutter shaft, to the same group of claw hammer according to the quality grade, weight less than 25 grams, with a heavy hammer claw or knife side can be installed in the drum.
HANGZHOU PERPETUAL MACHINERY & EQUIPMENT CO.,LTD
Add:Room 425,Building 2,TongRenJingHua,West Lake District,HangZhou, P.R.CHINA
- Conveyor Chain
- Conveyor Chain Introduction
- Roller Chain
- Invention Of Roller Chain
- Chain Maintenance
- Characteristics Of The Drive Sprocket
- Sprocket Assembly And Disassembly
- Drive Sprocket Installation Require...
- Drive Chain
- What Is The Difference Between A Be...
- What Are The Features Of A Spiral G...